OEDEC Engineering Pvt Ltd Recruitment 2026: Structural Designer – Tekla Walk-In Interview in Mumbai & Chennai (26

OEDEC Engineering Pvt Ltd Recruitment 2026

Structural Designer – Tekla Walk-In Drive in Mumbai and Chennai | 26–30 October
OEDEC Engineering Pvt Ltd is inviting experienced candidates to attend a walk-in recruitment drive for the position of Structural Designer – Tekla.
This opportunity is suitable for professionals with 1 to 6 years of relevant experience in structural design, 3D modelling, and structural detailing.
The company is conducting the walk-in drive from 26 October 2026 to 30 October 2026 at its offices in Mumbai and Chennai.
Candidates with mandatory proficiency in Tekla Structures and a good understanding of structural drawings are encouraged to attend with the required documents.

1. OEDEC Engineering Pvt Ltd Recruitment 2026 Overview

A. Recruitment Highlights

Company Name: OEDEC Engineering Pvt Ltd
Recruitment Type: Walk-In Drive
Position: Structural Designer – Tekla
Experience Required: 1 to 6 years
Job Locations: Mumbai and Chennai
Walk-In Dates: 26 October 2026 to 30 October 2026
Interview Timing: 11:00 AM to 4:00 PM
Required Software: Tekla Structures
Application Mode: Direct walk-in interview

B. About the Opportunity

The recruitment drive is intended for candidates who have practical experience in structural design and detailing.
Applicants should be comfortable working with Tekla Structures to create and modify 3D models and prepare technical drawings for structural steel and concrete projects.
Candidates can attend the drive at either the Mumbai or Chennai office, depending on their preferred location.

2. Vacancy Details and Eligibility Criteria

A. Position Available

Structural Designer – Tekla
The selected candidate will work on structural modelling, drawing preparation, and coordination activities associated with structural engineering projects.

B. Educational and Technical Suitability

The supplied recruitment notice does not specify a mandatory educational qualification.
Candidates should review their qualifications and relevant structural design experience against the company’s requirements.

The key eligibility conditions are:

– Between 1 and 6 years of relevant experience in structural design.
– Mandatory proficiency in Tekla Structures.
– A good understanding of structural drawings and detailing.
– Familiarity with structural steel and reinforced cement concrete (RCC) structures is an added advantage.
– Basic knowledge of applicable design codes and standards.

C. Experience Requirement

Candidates must have 1 to 6 years of relevant experience.
Applicants should be prepared to discuss their previous structural design assignments, software proficiency, drawing preparation experience, and understanding of project requirements during the interview.
Freshers are not covered by the stated experience range.

3. Key Responsibilities of a Structural Designer – Tekla

A. 3D Modelling Using Tekla Structures

The role involves creating and modifying three-dimensional structural models using Tekla Structures.
Candidates should be able to work with structural model information and make changes according to project requirements.

B. Preparation of Technical Drawings

The position includes preparing detailed shop drawings and general arrangement (GA) drawings.
Accuracy in structural detailing and a clear understanding of drawing information are important for producing usable project documentation.

C. Structural Steel and Concrete Projects

The selected professionals will work on structural steel and concrete projects.
Knowledge of steel structures and RCC systems can help candidates understand project requirements and detailing expectations.

D. Coordination with Project Teams

The role also requires coordination with design teams and onsite teams to support accurate and timely deliverables.
Candidates should be able to communicate drawing-related requirements and coordinate necessary updates during project execution.

4. Skills Required for the Position

A. Tekla Structures Proficiency

Tekla Structures is a mandatory skill for this recruitment.
Candidates should be familiar with using the software for structural modelling and drawing-related tasks.

B. Structural Drawing Interpretation

Applicants should understand structural drawings, detailing practices, and the information needed to prepare shop drawings and GA drawings.

C. Knowledge of Steel and RCC Structures

Knowledge of structural steel and reinforced concrete construction is an added advantage.
Candidates with experience in these project types can highlight relevant assignments during the interview.

D. Design Codes and Standards

Basic knowledge of relevant design codes and standards is expected.
Applicants should be prepared to explain their familiarity with the standards applicable to their previous work.

5. Walk-In Interview Schedule and Venue Details

OEDEC Engineering Pvt Ltd will conduct the recruitment

drive at both its Mumbai and Chennai offices.
Candidates should attend between 11:00 AM and 4:00 PM on one of the announced dates.

A. Mumbai Walk-In Interview Venue

Office: OEDEC Engineering Pvt Ltd, Thane Office
Address: Opal Square, 4th Floor, Unit No. 405 to 411, Padwal Nagar, Wagle Industrial Estate, Thane West, Maharashtra – 400604.
Walk-In Dates: 26 October 2026 to 30 October 2026
Timing: 11:00 AM to 4:00 PM

B. Chennai Walk-In Interview Venue

Office: OEDEC Engineering Pvt Ltd, Chennai Office
Address: Unit No. 2, 1st Floor, Tower C, TEK Meadows Campus, No. 51, Rajiv Gandhi Salai (OMR), Sholinganallur, Chennai, Tamil Nadu – 600119.
Walk-In Dates: 26 October 2026 to 30 October 2026
Timing: 11:00 AM to 4:00 PM

C. Which Office Should Candidates Attend?

Applicants can choose the Mumbai or Chennai office according to their preference and suitability.
Before travelling, candidates should verify the venue details and confirm any additional interview instructions with the company if clarification is needed.

6. Documents Required for the Walk-In Drive

Candidates must bring the documents

mentioned in the recruitment notice when attending the interview.

A. Mandatory Documents Checklist

– Updated resume.
– Salary slips for the last three months.
– Aadhaar card.
– PAN card.

B. Preparation Before Attending

Ensure your resume clearly presents your relevant structural design experience and proficiency in Tekla Structures.
If available, be prepared to discuss the types of structural projects you have worked on, your modelling responsibilities, and your experience preparing shop drawings and GA drawings.
Keep the requested identification documents and salary slips ready to help avoid delays during the recruitment process.

7. How to Attend the OEDEC Engineering Walk-In Drive

A. Check Your Eligibility

Confirm that you have 1 to 6 years of relevant structural design experience and proficiency in Tekla Structures.

B. Select Your Preferred Location

Choose the Mumbai office in Thane or the Chennai office in Sholinganallur based on your preference.

C. Prepare the Required Documents

Carry your updated resume, salary slips for the last three months, Aadhaar card, and PAN card.

D. Attend During the Scheduled Hours

Visit the selected office between 11:00 AM and 4:00 PM on any announced walk-in date from 26 October to 30 October 2026.

E. Discuss Your Relevant Experience

Be ready to explain your Tekla Structures skills, structural detailing knowledge, drawing preparation experience, and coordination with design or onsite teams.

8. Frequently Asked Questions

Q1. Which position is available at OEDEC Engineering Pvt Ltd?

The company is recruiting for the position of Structural Designer – Tekla.

Q2. How much experience is required?

Candidates should have 1 to 6 years of relevant experience in structural design.

Q3. Is Tekla Structures mandatory?

Yes. Proficiency in Tekla Structures is mandatory for this position.

Q4. When will the walk-in drive take place?

The walk-in drive is scheduled from 26 October 2026 to 30 October 2026.

Q5. What are the interview timings?

The stated interview timing is 11:00 AM to 4:00 PM at both locations.

Q6. Where are the interview venues?

Candidates can attend at the Thane office in Mumbai or the TEK Meadows Campus office in Sholinganallur, Chennai.

Q7. Which documents should candidates bring?

Applicants should carry an updated resume, salary slips for the last three months, Aadhaar card, and PAN card.

Q8. Is knowledge of steel and RCC structures required?

Knowledge of steel and RCC structures is listed as an added advantage.
Tekla Structures proficiency and relevant structural design experience are key requirements.

9. Conclusion

OEDEC Engineering Pvt Ltd Recruitment 2026

offers an opportunity for structural design professionals to attend a walk-in interview for the Structural Designer – Tekla position in Mumbai or Chennai.
Candidates with 1 to 6 years of relevant experience, practical Tekla Structures skills, and an understanding of structural drawings and detailing can consider applying through the walk-in process.
The recruitment drive is scheduled for 26 October to 30 October 2026, from 11:00 AM to 4:00 PM.
Eligible applicants should bring all the specified documents and attend their preferred office during the announced dates.

SEO Keywords